LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: anthropo on November 29, 2016, 10:32:51 pm

Title: SOLVED cannot setup esc in assistant
Post by: anthropo on November 29, 2016, 10:32:51 pm

hello

when, in assistant setup, i am at esc setup, when i start and plug in the battery, my esc beep. But when then i clic on stop, there is no beep response.

NB : BLHeli

After, when i plug the battery, esc make beep beep beep.... with nearly one second delay

Any idea please ?

Title: Re: cannot setup esc in assistant
Post by: TheOtherCliff on November 30, 2016, 05:04:32 am

It sounds like the ESC does not like that signal.  Maybe try PWM490 or PWMSync?

Title: Re: cannot setup esc in assistant
Post by: anthropo on November 30, 2016, 10:41:29 am

i have already try pwm 490, pwm sync  it is the same result

Title: Re: cannot setup esc in assistant
Post by: Mateusz on November 30, 2016, 12:25:52 pm

What ESC ? What version of LP ?

There is a fix which helped me with LitteBee ESCs that didnt recognize calibration procedure properly in rel-16.09 branch I belive.
https://bitbucket.org/librepilot/librepilot/commits/c368b4dfa50b

Does that help/solve your problem ?

Title: Re: cannot setup esc in assistant
Post by: anthropo on November 30, 2016, 01:46:24 pm

solved by reading ESC calibration step by step guide in the wiki

Thank you