LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Jackbear on November 06, 2016, 10:08:32 pm

Title: Board won't arm after setting flight modes
Post by: Jackbear on November 06, 2016, 10:08:32 pm

Everything was going great and flying great, but when I changed a few flight modes around this time, the board stopped arming. Its still set to Accessory O and I have greens across the board, but nothing. It was working fine just prior, I just don't know what is going on. Any ideas? Ive attached my uav file. Thanks in advance!!

Title: Re: Board won't arm after setting flight modes
Post by: f5soh on November 06, 2016, 10:37:34 pm

Please redo transmitter calibration, the min values are set to 0.


(https://forum.librepilot.org/index.php?action=dlattach;topic=2590.0;attach=4563)

Title: Re: Board won't arm after setting flight modes
Post by: Jackbear on November 06, 2016, 10:54:12 pm

I can't believe I missed that!! *facepalm* Thank you so much!!