LibrePilot Forum

General Category => General Discussion => Topic started by: batata003 on October 08, 2016, 05:28:27 pm

Title: How to use battery voltage inside the PID loop of CC3D atom with librepilot?
Post by: batata003 on October 08, 2016, 05:28:27 pm

Hi,

I realize that when my battery voltage drops, I need to use more throttle to keep the drone at same conditions and that when battery voltage drops my drone gets a little "loose". Is there someway I can connect a wire from my battery to CC3D in order to it use the voltage so it can compesate the drop voltage during the flight?

Title: Re: How to use battery voltage inside the PID loop of CC3D atom with librepilot?
Post by: f5soh on October 08, 2016, 05:29:20 pm

This feature is not supported currently

Title: Re: How to use battery voltage inside the PID loop of CC3D atom with librepilot?
Post by: batata003 on October 08, 2016, 06:02:56 pm

Thank you so much :)