LibrePilot Forum
Development => Hardware => Topic started by: anthropo on September 22, 2016, 10:34:47 am
-
Hello,
in http://www.drone-maniac.com/news-micro-minimosd/
They say that micro minimosd is able to read pwm rssi signal directly, without RC filter.
I have a X4RSB, can i put rssi signal directly on the micro-minimosd rssi input pad, does minoposd firmware read that ?
Thank you
-
All the info on minoposd is in the wiki at https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup
I'm told that the firmware called LP_All_From_Revo1708+AnalogRSSI_MicroKvteam_pin3.hex downloadable there is what you want.