LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: est on September 17, 2016, 09:40:54 pm

Title: cc3d and my graupner mc20 and gr12
Post by: est on September 17, 2016, 09:40:54 pm

My first quad. I have a graupner mc20 hott. Having trouble wiring between cc3d an gr12. Can anybody help me With that?

Title: Re: cc3d and my graupner mc20 and gr12
Post by: f5soh on September 17, 2016, 09:55:29 pm

Hi,

You can simply connect all wires needed to the GR12 receiver and select PWM input in hardware page.
Remember any change in Hardware page need a reboot (disconnect battery and USB)

(https://librepilot.atlassian.net/wiki/download/attachments/2818090/CC3D_PWM.png)

https://librepilot.atlassian.net/wiki/display/LPDOC/CC+Hardware+Configuration#CCHardwareConfiguration-ReceiverPort

Title: Re: cc3d and my graupner mc20 and gr12
Post by: est on September 17, 2016, 10:18:00 pm

Thank you  :) Ok! Have tryed that but it didnt work. Will try again. Do you now how to use and wire ppn on hott tocc3d.

Title: Re: cc3d and my graupner mc20 and gr12
Post by: est on September 17, 2016, 10:44:54 pm

Wow Tanks :D