LibrePilot Forum

Development => Firmware General => Topic started by: Eosus on September 14, 2016, 12:59:32 pm

Title: Questions LibrePilot Firmware
Post by: Eosus on September 14, 2016, 12:59:32 pm

Hello,

For a university project I would like to be able to add extra functionality to my revolution board. Currently I have the latest firmware from LibrePilot. Does anyone here have suggestions where I can find extra documentation on the current firmware? And some information about the requirements of the board itself (aka specific commands for input/output). Is there anywhere I can download the firmware for the board separately from librepilot? I was unable to find the answers to these questions on the wiki.

Eosus

Title: Re: Questions LibrePilot Firmware
Post by: f5soh on September 14, 2016, 01:40:25 pm

Hi, welcome.

Maybe start building your own GCS/firmware from sources ?
https://librepilot.atlassian.net/wiki/display/LPDOC/Developer+Manual

Title: Re: Questions LibrePilot Firmware
Post by: Eosus on September 14, 2016, 08:52:21 pm

Thank you for your reply

I found the missing information and now I think I can start figuring things out. I was somewhat confused regarding the dual use of SYMS2 for both firmware and librepilot but I think I understand how to use it now.

Cheers

Title: Re: Questions LibrePilot Firmware
Post by: jhm5z588 on September 22, 2016, 05:22:30 am

I can not find modelview on my version 16.09 was it removed or am I just not seeing it?

Title: Re: Questions LibrePilot Firmware
Post by: hwh on September 22, 2016, 06:15:46 am

It's still there.   Did you start the new GCS the first time with -reset?

Or you can go to File -> GCS settings Import/Export, click reset config, quit GCS, and start it again.