LibrePilot Forum
Users => Vehicles - MultiRotors => Topic started by: MrKitty on August 19, 2016, 12:30:56 am
-
ok so i been flashing firmware like crazy trying to get my OSD working right nothing i do can get the Horizon working (moveing) im on GCS 15.09 latest firmware updated throw librePilot i downloaded files from https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup both LP_MinimOSD_CC3D_analog_inputs1708.hex
LP_MicroKvteam_CC3D_analog_inputs1708.hex and flashed both to my OSD board
i do have working telemetry its reading the battery voltage in my OSD i have it wired throw the main port at 57600 so IDK why horizon wont work any firmware or info to fix this problem is greatly appreciated
-
Battery voltage has nothing related with working telemetry. This can work with OSD alone.
Any message blinking on screen ?
-
your right unplugged switching the wires pluging into the flex port nothing i still get battery but no telemetry nothing flashing on the screen
-
Set the "OverSpeed" message and place it in a free area, if to close from the horizon in center you will see nothing.
(https://librepilot.atlassian.net/wiki/download/attachments/7274504/config_tool_panel1.png)
Set the port you use with Telemetry and remember every change in Hardware tab need a board restart.
Check your wiring.
Whats the boot message at start ?
-
I think thread title is incorrect as it suggests that some bug was discovered. There is clearly no reproducible test-case for this to be a confirmed bug, but very likely as it often happens, some sort of user error. I use microminimosd on 4 builds now, and I don't have any problems...