LibrePilot Forum

Users => Vehicles - Helicopters => Topic started by: zick on July 28, 2016, 02:13:47 pm

Title: turnigy 9x
Post by: zick on July 28, 2016, 02:13:47 pm: Sorry for English, translator.
how can copy the radio codes , I have a drone working with a 9x , but the new cc3d can not configure the radio . the wizard does not recognize it and lock.
Title: Re: turnigy 9x
Post by: daveapplemotors on July 28, 2016, 10:06:01 pm: Check the multirotor forum. I am sure someone is using a 9x. https://forum.librepilot.org/index.php?board=2.0
Title: Re: turnigy 9x
Post by: Mateusz on July 28, 2016, 10:12:39 pm: I have Turnigy 9X radio flashed with OpenTX. I took it apart, soldered cables to the pads, and used AVR programmer to flash it. In OpenTX it' really easy to set which knob, button, stick movement relates to which channel. Only then signal is sent. I couldn't stand stock firmware on it.
Title: Re: turnigy 9x
Post by: zick on July 29, 2016, 03:12:13 pm: dave, you can help me because just want to know in system , database where are the radio the codes you posted on another topic to your radio command line, because I want to copy the drone that works for your setup helicopter
Title: Re: turnigy 9x
Post by: daveapplemotors on July 31, 2016, 01:25:31 am: I have been trying to understand what you want.

I think you are asking me where in the System side the radio numbers are. Like these in System / hwSettings:

<object name="ManualControlSettings" id="0x72A1176C">
<field name="FailsafeChannel" values="-1,0,0,0,0,0,0,0,0"/>
<field name="ChannelMin" values="174,174,171,172,0,174,171,0,0,0"/>
<field name="ChannelNeutral" values="175,512,509,512,413,175,853,0,0,0"/>
<field name="ChannelMax" values="852,844,852,852,750,850,853,0,0,0"/>
<field name="ResponseTime" values="0,0,0,0,0,0,0,0"/>
<field name="ChannelGroups" values="DSM (FlexiPort),DSM (FlexiPort),DSM (FlexiP
Title: Re: turnigy 9x
Post by: zick on July 31, 2016, 03:16:51 am: Thank you Dave. I got to the 450 file q think was your config GPS .