LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Nomedasi on June 27, 2016, 06:24:16 am

Title: Won't do anything
Post by: Nomedasi on June 27, 2016, 06:24:16 am

I setup everything on the PC and everything seems fine. Transmitter seems to be working fine. Disconnect PC and plug in flight pack will not arm. I have even set it to always arm. I am using a cc3d atom, spectrum SPM4648 satellite receiver, and DX6i transmitter. I am at my wits end. Looked on the web and cannot find out why it won't work.

Title: Re: Won't do anything
Post by: Nomedasi on June 27, 2016, 07:12:20 am

Ok I got it to arm. I had to manually set the transmitter up seems on channel wouldn't assign. When it spools up now there is no slow spool up it that normal? Do I need to adjust the throttle curve right now it is straight?

Title: Re: Won't do anything
Post by: TheOtherCliff on June 30, 2016, 06:49:25 am

Multicopters do not spool up slowly like regular helis.  The motors must react very fast under all conditions.