LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: dennism on May 26, 2016, 12:23:51 pm

Title: Problem. Drone starts to flight by 10% trottle
Post by: dennism on May 26, 2016, 12:23:51 pm

Hello every one,

I've made drone with a cc3d and configurate it with Libre pilot.
Everything worked fine, it starts to flight around 50% throttle.
But last week i crashed, and broke one prop. After the crash i bought 4 new props, and now it start to fly by 10% throttle. I cant find the problem.
I had 1045 props, and i also bought 1045 props.

What can I do about this problem, buy some smaller or less pitch props or is there a configuration faillure?

Thankyou for your response,

My set up:

frame: q450
esc: simonk
motors: 1100kv
flight board: cc3d
transmitter: flysky fs-i6
battery: zippy compact 3700mah
Props: 1045

Title: Re: Problem. Drone starts to flight by 10% trottle
Post by: Mateusz on May 26, 2016, 02:29:33 pm

If you have the same weight and hardware, you must have changed something which you forgot about. If you desire less powerful copter you can adjust throttle responses curve.