LibrePilot Forum

Development => GCS General => Topic started by: Sirsamuel13 on May 21, 2016, 10:58:58 pm

Title: Armed but motors wont spin.
Post by: Sirsamuel13 on May 21, 2016, 10:58:58 pm

Im using librepilot 15.09, and when the drone arms the motors wont move, when i move the sticks. Ive tried resetting the board, ugrading, ugrading and erasing and importing new UAV settings. The motors do spin when i go through the vehicle settup wizard, so its not a hardware.

Title: Re: Armed but motors wont spin.
Post by: f5soh on May 21, 2016, 11:11:52 pm

What esc do you use ?

The min value should be 1000 for all motors in Output tab.

Title: Re: Armed but motors wont spin.
Post by: Sirsamuel13 on May 22, 2016, 12:27:18 am

15 amp esc. 3s batteries, and 2204-2300kv motors

Title: Re: Armed but motors wont spin.
Post by: JediHutch on August 06, 2016, 06:21:46 am

Did you find a solution for this?  I'm running into the same problem.