LibrePilot Forum

Users => Applications - FPV => Topic started by: kennyevo on April 11, 2016, 06:06:47 pm

Title: MinOPOSD disappears on throttle
Post by: kennyevo on April 11, 2016, 06:06:47 pm

Hi!

I've configured my minoposd, it shows everything correctly, and it is connected to the rc input port. (i'm using oplink vehicle control)
When I want to take off, the screen flashes and the osd disappears, but If I use the transmitter without the osd it doesn't blink on throttle. (so I don't think that it's a interference with the motors (at least not on the 12v side).
Is it possible that the esc gives instabil voltage to the FC?
Should I use a Power modul?

Thanks in advance!

Title: Re: MinOPOSD disappears on throttle
Post by: kennyevo on April 14, 2016, 10:04:11 am

Okay, it was the BEC's fault which is integrated in my ESCs. If I power the FC from a power modul everything is fine. (should have done that at the beginning)