LibrePilot Forum

General Category => General Discussion => Topic started by: ArnhemAnt on September 06, 2015, 12:55:11 am

Title: UAV landing and take-off mat
Post by: ArnhemAnt on September 06, 2015, 12:55:11 am

Due to my location, I have a LOT of dirt and dust to contend with and want to try and keep this away from my motors, etc. I have designed a mat which measures 1500mm square. I plan to have this made in vinyl so it is durable.
I have attached a first draft of the mat as I would really like your opinions, particularly in the way that I have integrated the Pre-flight and Post-flight checklists. If you have suggestions on things to add or remove please let me know.

Thanks in advance.

Title: Re: UAV landing and take-off mat
Post by: liftbag on September 06, 2015, 07:29:23 am

English is not my language, but "flight vacinity"?

Title: Re: UAV landing and take-off mat
Post by: ArnhemAnt on September 06, 2015, 07:42:48 am

^^ Thanks. I have changed that working. Updated doc attached.

Title: Re: UAV landing and take-off mat
Post by: m_thread on September 06, 2015, 09:22:35 am

That mat looks very good :) Right now here in Sweden I would need an umbrella over it though. The fall rains have arrived and flying is not possible now :(
/Fredrik

Title: Re: UAV landing and take-off mat
Post by: ArnhemAnt on September 06, 2015, 02:10:33 pm

Thanks Fredrik,
Yes, our wet season is only a few months away. I'm trying to make the most of the weather at the moment, but work is seriously getting in the way.