LibrePilot Forum

Users => Applications - FPV => Topic started by: pra12456 on March 31, 2016, 02:14:41 am

Title: Hubson X4107D FPV and Fatshark Dominator V3
Post by: pra12456 on March 31, 2016, 02:14:41 am
Well this was supposed to be easy, and I am not finding to be so.
If I use the Hubson to learn accidents will be less costly and I can fly more.

Goggles Fatshark Dominator V3
Receiver Fatshark Dominator 5.8 GHz Module
Antenna both the standard antenna that ships with the receiver
ImmersionRC spiroNET Circular polorized Antenna.

I found articles where people connected the Fatshark V2 to the Hubson X4 and they used the radio to do it.

I have tried 3 of the 4 bands FS/IRC, RaceBand, Boscam A, and most of the frequencies in the list.
Nothing.

Process  I power on goggles, power on the drone, power on the radio.

Pick open the menu on the radio and pick a frequency  that matches both sides.

from the goggles I scroll through the 8 channels and i never get anything.

is there something I am missing on binding this?

is there a way to make a cable from the radio to the goggles.

the Hubson goggles are and option at 120 not that expensive other than the reviews trash them and suggest you try other goggles.
Title: Re: Hubson X4107D FPV and Fatshark Dominator V3
Post by: jbarchuk on March 31, 2016, 04:32:17 am
Not trying to blow you off but you're reeeeeaally gonna get muuuuch better information from a hubsan- or fatshark-specific forum.