LibrePilot Forum

General Category => General Discussion => Topic started by: zukenj on March 08, 2016, 07:00:45 pm

Title: BLHeli newbie question
Post by: zukenj on March 08, 2016, 07:00:45 pm

I have Revolution FC, HK 30A ESC UBEC running BLHeli 14.4, should I enable OneShut?

Title: Re: BLHeli newbie question
Post by: f5soh on March 08, 2016, 08:30:36 pm

Yes, select OneShot for best results

Title: Re: BLHeli newbie question
Post by: zukenj on March 08, 2016, 08:35:33 pm

Thanks.

I will try and report back tonight.

Title: Re: BLHeli newbie question
Post by: zukenj on March 09, 2016, 05:03:18 pm

Sorry,

I can't enable ESC OneShot, because my RC does not do PPM. Looking to do the FrSky mod to my RC.

Title: Re: BLHeli newbie question
Post by: f5soh on March 09, 2016, 05:13:13 pm

If you are using a Revolution board you don't have limitations about OneShot.
This only applies to CC3D that doesn't allow Oneshot with PWM input and need PPM or other "serial" input.

Title: Re: BLHeli newbie question
Post by: zukenj on March 20, 2016, 04:28:56 am

Ok. I will enable it tomorrow and try to flight.

I can tell you that just upgrading the ESC to BLHeli was a huge improvement in the way it flight, even change the sound of the motors