LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Brassman on February 11, 2016, 09:35:09 am

Title: cc3d anti vibration mount pros?
Post by: Brassman on February 11, 2016, 09:35:09 am
hello!
what is the pros and cons of using a fc anti vibration mount on the cc3d. in theory is should be good but how is it reality? anyone noticed any differance?
thanks
Title: Re: cc3d anti vibration mount pros?
Post by: NicholasDavid on February 11, 2016, 02:24:19 pm
I had a motor bearing making noise and it made my copter drift in attitude mode. I mounted my bare(no plastic case)board with foam and that fixed my drift issue. Mounting for vibration usually isn't needed. And the anti vibe mounts take up more space than is needed. They seem to work as advertised but some thick double sided sticky foam will accomplish the same thing. Most boards are fine on the plastic standoffs.
Title: Re: cc3d anti vibration mount pros?
Post by: Brassman on February 12, 2016, 07:37:32 am
alright thanks for the heads up :) I will use it is there is enough space then