LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: rogdodger1 on January 28, 2016, 08:48:04 pm

Title: Revolution not recognized by LibrePilot - Help
Post by: rogdodger1 on January 28, 2016, 08:48:04 pm

I have been flying CC3D quads for a while and have had no trouble connecting to the GCS. I have now bought a Revolution but I can not connect on my MAC or Windows machine. On the Mac is shows one green Tx and Rx light. On the windows it does not recognize the USB device.
Does anyone have any ideas or leads. I have spent hours on this and hope there is a solution. I am really looking forward to the GPS flying.
Thanks

Title: Re: Revolution not recognized by LibrePilot - Help
Post by: JamesPal on February 02, 2016, 11:23:13 pm

Noob here, so take this for that, I had trouble getting the USB to connect in Win7. I was able to get Win7 to recognize the CC3D by rebooting windows with the CC3D connected. I kept running into the GCS locking up. I loaded the GCS on my Ubuntu laptop, plugged it in and everything works fine.

Title: Re: Revolution not recognized by LibrePilot - Help
Post by: rogdodger1 on February 20, 2016, 05:39:15 am

Thanks, turns out i had a bad controller. After some effort Banggood replaced it.