LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: brand1068 on January 02, 2016, 12:56:45 pm

Title: Arming Issues
Post by: brand1068 on January 02, 2016, 12:56:45 pm

I have an F450 with Simonk 30a Speed controllers on a Futaba 7C and R617FS Rx

Ran it through the Vehical setup and the TX wizard but it wont arm unless i set it to always arm..

The Motor Channels are set to PWM 490hz both channels appear to respond to the TX when moved.

Assuming I'm doing something stupid - any ideas ?

Chris

Title: Re: Arming Issues
Post by: muchzill4 on January 02, 2016, 12:59:16 pm

Do you have any of the alerts in red on the flight data panel?
Did you try different arming settings? (switch vs yaw or what have you)

Title: Re: Arming Issues
Post by: f5soh on January 02, 2016, 01:02:30 pm

Hi,

Check if you see any red alarm in your SystemHealth panel

The  [ ? ] can give more information.
(https://librepilot.atlassian.net/wiki/download/attachments/5669070/systemhealth_tooltip.png)

You can also post your config file: File > Export UAV settings and attach .uav file here.

Title: Re: Arming Issues
Post by: brand1068 on January 02, 2016, 02:09:09 pm

Ok  - not sure why but set all the flight modes to manual thrust and that appears to have fixed it.

Have one issue with the motors but will start another post - thanks for your help