LibrePilot Forum

General Category => General Discussion => Topic started by: Darphus on January 18, 2018, 07:21:50 pm

Title: Telemetry host ip address?
Post by: Darphus on January 18, 2018, 07:21:50 pm

I had some problem with the "host and port" and no RX and TX showing. Dust I putted an ip into the "Tools/Option/Telemetry network IP" and now the TX show color and datas but not the RX. I putted the random ip.

My question is what is the IP needed to for this field dust I could update and work with the platform.

Thanks

Title: Re: Telemetry host ip address?
Post by: f5soh on January 19, 2018, 07:46:25 pm

Not sure what you want to achieve, current udp host/port listed in Preferences are used to connect with a running firmware in host, like simposix.