LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: tinou on October 13, 2017, 09:08:13 pm

Title: Dji gps -- wire
Post by: tinou on October 13, 2017, 09:08:13 pm

Hello.
One of my friend gave me a dji gps. But we didn't know who wire is who.
4 wires : red              ok +5v
                Yellow
                Orange
                Brown
See pictures in attach.
If you can help please
Tks  ;D ;D

Title: Re: Dji gps -- wire
Post by: f5soh on October 13, 2017, 09:14:39 pm

Take a look here (https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/12058679/GPS+setup#GPSsetup-NazaGPS)

From picture you can easily find the ground and +5v.
There is also two marks in original connector.
(https://librepilot.atlassian.net/wiki/download/attachments/12058679/GPS_Naza.png)

Title: Re: Dji gps -- wire
Post by: tinou on October 13, 2017, 09:27:46 pm

Thanks but..  no connector ;) just 4 wires without nothing

Title: Re: Dji gps -- wire
Post by: f5soh on October 13, 2017, 09:54:22 pm

On PCB you can see the ground (Brown). Red wire should be the +5V and you need another wire (likely the yellow one) from GPS connected to the RX (pin4) on Revo.

(http://i.imgur.com/vwZrzjB.jpg)

Title: Re: Dji gps -- wire
Post by: tinou on October 13, 2017, 10:47:14 pm

Ok so pin 1 : brown
           pin 2 : red
           pin 3 : orange
           pin 4 : yellow

Thanks for this pictures!!!