LibrePilot Forum

General Category => General Discussion => Topic started by: utoedter on August 15, 2017, 03:40:48 pm

Title: Re: Confused about flexio port on Revolution
Post by: utoedter on August 15, 2017, 03:40:48 pm

Hello folks,

im trying to connect to OSD to my Revolution Nano FC. My plan is, to use the flexio port, because main and flex port are already occupied by GPS and SBUS receiver.  The docs are mentioning pins 9 and 10 but there are only 8 physical pins in the socket. Pins 3-4 are usually showed with a shortened wire in the diagrams, does it mean, they dont exist?

 

Title: Re: Re: Confused about flexio port on Revolution
Post by: f5soh on August 15, 2017, 03:58:08 pm

You don't talk about the Nano Revolution (https://librepilot.atlassian.net/wiki/display/LPDOC/OpenPilot+Revolution+Nano) but a Revolution clone in 'Mini' size.

They simply removed the pin3 and pin4 used for WS2811 Led output
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818094/Revolution+Configuration#RevolutionConfiguration-FlexiIOpinOut/Functions