LibrePilot Forum

General Category => General Discussion => Topic started by: Sheldon on July 23, 2017, 06:58:00 am

Title: RISE rxs270 help
Post by: Sheldon on July 23, 2017, 06:58:00 am

 I have recently obtained a  Rise rxs270 and was wondering if anyone had a configuration file for the factory settings. Maybe just a decent configuration that will work well. I almost have no idea what I am doing and did not realize it was preprogrammed from the factory. any help would be awesome, thanks

Title: Re: RISE rxs270 help
Post by: f5soh on July 23, 2017, 07:30:37 pm

Hi,

According to the previous config file (15.09 release) published in Hobbico website http://downloads.hobbico.com/software/ris/rxs270-stock.zip
Here is the config file for 16.09 release (attached file)

You can also import the template attached that allow restoring the main stabilization settings.
https://librepilot.atlassian.net/wiki/pages/viewpage.action?pageId=63668239#Import/Exportvehicletemplate-Importtemplate

I recommend redo the transmitter wizard or at least a Manual calibration if all stick assignments looks fine.

Title: Re: RISE rxs270 help
Post by: Sheldon on July 25, 2017, 02:17:20 am

Thanks a lot! Setup worked this time, now I just need a test flight. Appreciate the help.