LibrePilot Forum

Development => Firmware General => Topic started by: kendy on June 28, 2017, 10:11:34 am

Title: CC3D Brushed
Post by: kendy on June 28, 2017, 10:11:34 am

hi, i have some problem with cc3d brushed.. i have flashed the board with a normal cc3d firmware, is it correct or need a special fw? thanks

Title: Re: CC3D Brushed
Post by: TheOtherCliff on June 28, 2017, 03:46:47 pm

From what I recall, you flash normal firmware, but there is no GUI setup for this.  You must make your adjustments to allow brushed motors in System -> Settings.

I found this thread by searching the forum for:
brushed

https://forum.librepilot.org/index.php?topic=1597.0