LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: amin aziz on April 25, 2017, 03:51:05 pm

Title: throttle output low even at full stick.
Post by: amin aziz on April 25, 2017, 03:51:05 pm

hi everyone,

having this problem even throttle stick at full position.can anyone here advice?
thanks.... 8).

rgd
Amin Aziz

Title: Re: throttle output low even at full stick.
Post by: f5soh on April 25, 2017, 04:39:33 pm

Hi,

Not sure what you mean... motors still at low rpm or are stopped whatever the Throttle position ?
Is the board armed ?

You can post your config file here: File > Export UAV settings.

Title: Re: throttle output low even at full stick.
Post by: amin aziz on April 26, 2017, 05:01:38 pm

yes sir the board is armed.....but i can't get full throttle output when
i push the throttle to the end... :( :(

Title: Re: throttle output low even at full stick.
Post by: f5soh on April 26, 2017, 05:05:38 pm

Config file ? I don't have a crystal ball...

Motors are running ? Did you calibrate the Esc ?

Title: Re: throttle output low even at full stick.
Post by: karla on April 26, 2017, 05:25:51 pm

Quote from: f5soh on April 26, 2017, 05:05:38 pm

Config file ? I don't have a crystal ball...

No crystal ball?
What happened to it Laurent?
:)

Title: Re: throttle output low even at full stick.
Post by: amin aziz on April 28, 2017, 07:01:22 am

sorry it been awhile I'm not online....ok wil try to do the esc calibration.
and will let you know sir...Than you for the advice. 8) 8) 8).

Title: Re: throttle output low even at full stick.
Post by: amin aziz on May 01, 2017, 08:12:20 am

hi all,
here is my config..output & input.

Title: Re: throttle output low even at full stick.
Post by: f5soh on May 01, 2017, 01:57:23 pm

You can post your config file here.

Do File > Export UAV settings. and attach file here.

Title: Re: throttle output low even at full stick.
Post by: amin aziz on May 04, 2017, 03:07:51 pm

here is the attachment sir.

Title: Re: throttle output low even at full stick.
Post by: f5soh on May 04, 2017, 06:40:04 pm

If you want to share the config you should connect the board before saving the UAV config file or configure something on it.

The file you posted only show default/unconfigured board settings.