LibrePilot Forum
General Category => General Discussion => Topic started by: proff on April 17, 2017, 01:18:23 am
-
Hi all I'm an old Open pilot addict
I was forced too let rc a bit aside during few month but I'm back in stuff !!
I was sad to see openpilot website down but I've finaly found where you're hiding now !! :D
I have put my old revo board back alive with last fw and last GCS and it works well ... with oplink too !!! and it's super cool
but I still have trouble with DSM satelite support :(
I bind my satelite with and external dsm2 receiver and it's well binded
I use 3.3v from board and satelite is well connected and alive
and despite of this gcs says it's mute :( "no activity"
I made a patch few years later for a problem almost same but it looks It have not been released :(
may be I'm alone with this problem or does any one else found a solution ?
thank's for any help
-
Hi Olivier,
Glad you found LibrePilot :)
Not sure what happened with your changes, i see the PR merged and reverted the same day.
(https://forum.librepilot.org/index.php?action=dlattach;topic=3342.0;attach=5741)
Maybe take a look here: https://forum.librepilot.org/index.php?topic=3185.0
And made a PR, rules still the same :)
https://librepilot.atlassian.net/wiki/display/LPDOC/Git+Workflow
-
Hi all I'm an old Open pilot addict
I was forced too let rc a bit aside during few month but I'm back in stuff !!
I was sad to see openpilot website down but I've finaly found where you're hiding now !! :D
I have put my old revo board back alive with last fw and last GCS and it works well ... with oplink too !!! and it's super cool
but I still have trouble with DSM satelite support :(
I bind my satelite with and external dsm2 receiver and it's well binded
I use 3.3v from board and satelite is well connected and alive
and despite of this gcs says it's mute :( "no activity"
I made a patch few years later for a problem almost same but it looks It have not been released :(
may be I'm alone with this problem or does any one else found a solution ?
thank's for any help
also having problems external bind , but no reaction at all
traced wires 3,3v oke gound oke signal oke
scap that, solderd wrong pad (measure it right but placed wrong / ground-pad)