LibrePilot Forum

General Category => General Discussion => Topic started by: Skipp on March 15, 2017, 07:52:07 am

Title: PPM Input on FlexiIO for Revo China Clone
Post by: Skipp on March 15, 2017, 07:52:07 am

Hi,

I use this Revo Clone: http://www.banggood.com/OpenPilot-CC3D-Revolution-Revo-10DOF-STM32F4-Flight-Controller-Staight-Pin-p-1000068.html?rmmds=search

But can´t get PPM Input on Pin 5 of FlexiIO Port. In Hardware Tab FlexiIO is set to PPM+Telemetry an Frsky X4RSB is flashed to PPM Firmeware. Maybe this Clone use some other Pin to PPM Input? Any ideas?

Thanks
Skipp

Title: Re: PPM Input on FlexiIO for Revo China Clone
Post by: Jhinta on March 15, 2017, 10:18:43 am

Don't know witch pin it is but it is the white one.
Also there is a wiki for this info

Verstuurd vanaf mijn LG-D855 met Tapatalk

Title: Re: PPM Input on FlexiIO for Revo China Clone
Post by: TheOtherCliff on March 15, 2017, 05:02:39 pm

It may be best to look in the wiki and count the wires (not rely on wire color) because different manufacturers sometimes use random wire colors.

Title: Re: PPM Input on FlexiIO for Revo China Clone
Post by: Skipp on March 16, 2017, 12:54:55 am

Problem solved... forget to jumper  X4RSB on binding, so no PPM Output. After a long evening of setting up the complete plane a stupid mistake.