LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: JiveFPV on March 11, 2017, 05:47:13 am

Title: CC3D OneShot125 connections
Post by: JiveFPV on March 11, 2017, 05:47:13 am

I understand that in order to use OneShot on CC3D, I can't use PWM inputs from a "standard" receiver. I have Spektrum so I can use the Spektrum satellite connected to the Main or Flex port. What I can not find anywhere is where do I connect my ESCs. Looking at the hardware diagram it makes it look like the servo pins, where I currently have my ESCs connected using PWM , is ONLY for PWM.

So where do I connect my ESCs when I get around to connecting my Satellite and enabling OneShot, do they still go on the servo output pins like I currently have it?

Title: Re: CC3D OneShot125 connections
Post by: f5soh on March 11, 2017, 11:33:05 am

Esc wiring still the same but outputs are configured differently and finally output a different signal. PWM, PWMSync, OneShot...
PWM input (for CC3D) is not compatible with Oneshot, not due to pins used but timers used internally for PWM decoding.