LibrePilot Forum

General Category => General Discussion => Topic started by: onurgencoglu on February 27, 2017, 07:35:12 pm

Title: CC3D Gyro dont work with 16.09
Post by: onurgencoglu on February 27, 2017, 07:35:12 pm

Hi

When ı update CC3D, gyro stoped working. I read a few topics about the same problem but no solution around.

Can anyone help me ?

Note: the same problem here https://forum.librepilot.org/index.php?topic=3118.0 (https://forum.librepilot.org/index.php?topic=3118.0)

SS http://prntscr.com/ee3cgg (http://prntscr.com/ee3cgg)

Title: Re: CC3D Gyro dont work with 16.09
Post by: f5soh on February 27, 2017, 11:50:00 pm

Your board may work fine but you are using the 16.09 with older config file.
This cause PFD display using old files.

Reset your GCS Settings : File > Import / Export GCS Settings and click the 'Reset config' button.
You can do the same reset starting the "LibrePilot GCS (Clean configuration)" shortcut in Application menu > Librepilot folder