LibrePilot Forum
General Category => General Discussion => Topic started by: Vleaugs on November 23, 2016, 03:30:55 am
-
I got that red led blinking when I charge my battery, anyone knows what it seems?
https://vimeo.com/192728206 (https://vimeo.com/192728206)
Sent from my iPhone using Tapatalk
-
Could be a bad connection in the balance connector.
Measure voltage between adjacent pins starting with black.
If you say that black is pin 1, then measure 1->2 and 2->3 and 3->4 and each should be between 3.3v and 4.2v
-
Could be a bad connection in the balance connector.
Measure voltage between adjacent pins starting with black.
If you say that black is pin 1, then measure 1->2 and 2->3 and 3->4 and each should be between 3.3v and 4.2v
Ok thanks I wanna test it tomorrow , now I'm going to bed .
Helped me a lot
Sent from my iPhone using Tapatalk