LibrePilot Forum

General Category => General Discussion => Topic started by: dabrain on October 28, 2016, 01:42:00 pm

Title: Rc 16.9 rc1 and oplink
Post by: dabrain on October 28, 2016, 01:42:00 pm

I fly an quad, using Revo. This is controlled by oplink groundstation connected to my devo6s true PPM.

Flew all summer without any problems. When I upgraded both the FC and the oplink to 16.1rc, I lost control.

I cant control my quad true oplink anymore. However iam still able to receive telemetry, and change settings true the oplink. ( I know have to upgrade to 16.2rc). The cables looks solid, is there something I overlooked?

Title: Re: Rc 16.1 and oplink
Post by: f5soh on October 28, 2016, 04:02:12 pm

Hi,

I don't know what you call 16.1rc... is 19.09RC1 ?
I use the 16.09 for control using Oplink without issues.
Ground Oplink is always the coordinator, "DataAndControl" in both sides

Title: Re: Rc 16.9 rc1 and oplink
Post by: dabrain on October 28, 2016, 04:51:12 pm

Yes sorry it is 16.09 rc1, my bad. It used to work with the old version. So you"re saying you have no issues regarding this, I guess i have to double check my wires and settings, will post a picture of my  settings later.

Thanks

Title: Re: Rc 16.9 rc1 and oplink
Post by: TheOtherCliff on November 10, 2016, 02:46:25 am

Did you update firmware on both the Revo and the OpLinkMini?