LibrePilot Forum

General Category => General Discussion => Topic started by: batata003 on October 08, 2016, 05:26:25 pm

Title: Magnetometer with cc3d atom
Post by: batata003 on October 08, 2016, 05:26:25 pm

Hi,

I read many places that it's impossible to use BMP180 (baro) with cc3d and librepilot, I would need to flash cleanflight. I used cleanflight and hated it, so came back to librepilot.

So my question is this: is possible to add a magnetometer to cc3d atom? If so, what would be the benefits if I can afford a little of drift in yaw direction and if the only benefit would be a precise yaw I would not use it?

Title: Re: Magnetometer with cc3d atom
Post by: f5soh on October 08, 2016, 05:30:05 pm

The CC3D do not support magnetometer.

Title: Re: Magnetometer with cc3d atom
Post by: batata003 on October 08, 2016, 06:03:15 pm

Thank you, I will stop looking for it!