LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Nefer on September 05, 2016, 03:43:44 am

Title: AUX channels problem
Post by: Nefer on September 05, 2016, 03:43:44 am

Hi,
Here is my setup:
Transmitter: Turnigy 9x (stock firmware)
Receiver: Frsky d8r-II plus

This how my cc3d is wired with the receiver:

Black/red/white   Ch 1
blue                   Ch 2
Yellow                Ch 3
Green                Ch 4
[empty]             Ch 5
Yellow                Ch 6
Black                 Ch 7

I ran the transmitter wizard setup and throttle/yaw/pitch/roll and 3 flight mode switch are detected and working perfectly! Transmitter wizard setup dont detect any other auxiliar channel. I tried assign it manualy but also didnt work.
In my transmitter i assigned Gear switch to all channels (one by one) librepilot never detected any auxiliar channel again.

I want arm my motors with a auxiliar channel and i want to setup a buzzer switch to turn it on if i lose my model.


[Please dont post links with buzzer setup tuturial, i already know how to do it, but i cant do anything because my aux channels not working, or youtube videos i already saw all of them]

If some expert read this and know whats going on please Help me! Im pulling my hair out.

Thank you

Title: Re: AUX channels problem
Post by: TheOtherCliff on October 18, 2016, 08:27:32 pm

Sorry you didn't get a quick response.  :(  Just for your information, cross posting the same question is not the best thing to do.  :)

I answered in another of your threads.  You probably need to configure your transmitter to send these channels out.
https://forum.librepilot.org/index.php?topic=2250.msg17407#msg17407