LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Monter on August 29, 2016, 01:43:27 pm

Title: Major problems with CC3D setup
Post by: Monter on August 29, 2016, 01:43:27 pm

Hello everyone!

Recently I someone gifted me a LHI 250 Race Copter (Some cheap chinese QAV clone) and I build it and started flying with the standard settings which worked surprisingly good.
But I wasn't really satisfied with the current flight behaviour so I tried to change the settings.
I just followed the setup wizard and set up everything like it said. (Updated firmware etc.)
But when I tried flying it it all of a sudden just full throttles and flips onto its top.
Its unflyable (Will post video soon)


Anyone got any idea what I'm doing wrong? (I'm a total noob)

Setup:

MT2204 2300KV
Simonk 12A ESC
Li-po 11.1V 1500mA 35C 3S
CC3D


EDIT: I'm so sorry I posted in wrong thread, can a mod/admin move, I'm so so sorry

Title: Re: Major problems with CC3D setup
Post by: ernstock on August 30, 2016, 08:33:22 pm

Hi
How Is the flight controller mounted   - poss needs a correction on attitude page.
Also might be worth going through the GCS setup again.

Title: Re: Major problems with CC3D setup
Post by: NicholasDavid on August 30, 2016, 09:48:50 pm

Yes how Is the cc3d mounted. The arrow pointing forward and USB at the back? If not,it may just need a rotation in the attitude page.

Depending on which direction the arrow is pointing.