LibrePilot Forum
General Category => General Discussion => Topic started by: Marduk2004 on June 13, 2016, 05:44:44 pm
-
Hi,
I build the next branch for my Sparky 2.0 and connect my DSM Satellite on the RCVRPort. With Wizard looks all good at the Setup. But it recognize no Channels and i can't select any Channel manual, only Disable. Know's anybody a workaround?
Oh there is a problem with the Wizard, it recognize no OPTO ESC's. But manual work's.
Sorry for my bad english
-
DSM is untested with Sparky2
you can change yourself one line like in this PR, ground/gcs/src/plugins/config/inputchannelform.cpp file :
https://bitbucket.org/librepilot/librepilot/pull-requests/262/lp-72-missing-channels-input-for-dsm/diff
it recognize no OPTO ESC's. But manual work's.
What do you mean, i don't understand.
Talking about calibration ?
-
Yes, there not respond in Calibration. But in manual Calibration it works...
-
Do you mean in "vehicle wizard" as compared to "setting up manually on the Input page"?
How about "transmitter wizard"
How about other DSM inputs, such as FlexiPort or MainPort?
-
The problem with the OPTO's is only in the Vehicle Wizard at the ESC Calibration.
The Transmitter Wizard works with the DSM but when i check the the Input Tab Remote Controle Input, i have at Type "DSM RcvrPort" at all Functions. But at Number there is empty and the only choise is Disabled. And no Input is recognized...
-
About missing channels, i already answered in first post here:
you can change yourself one line like in this PR, ground/gcs/src/plugins/config/inputchannelform.cpp file :
https://bitbucket.org/librepilot/librepilot/pull-requests/262/lp-72-missing-channels-input-for-dsm/diff
One issue at same time, the Esc calibration is not related to DSM.
-
Ok the DSM works with the new Line in inputchannelform.cpp ;D