LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Curtgroff on April 30, 2016, 05:40:49 am

Title: Revo will not arm
Post by: Curtgroff on April 30, 2016, 05:40:49 am

Hello I am new to this I went threw all the steps I have gps setup it is green my flight modes are mode 1 is stabilize  mode 2 position hold 2 is return to home the configure light is red ever thing is green just need some help please

Title: Re: Revo will not arm
Post by: Mateusz on April 30, 2016, 06:31:35 am

• There is no such thing as Revo, you must be talking about Revolution board
• Please write what "all" steps
• Screenshot with your problem, what is red would be helpful :)

By the way you can't arm in position hold flight mode. That is not allowed for safety reasons.

Title: Re: Revo will not arm
Post by: Curtgroff on April 30, 2016, 09:31:51 pm

Sorry it is a revo mini here is some pics

Title: Re: Revo will not arm
Post by: f5soh on April 30, 2016, 09:35:33 pm

Wrong color is red.

So there is something wrong in your config, click on [ ? ] icon
Post your config file: File > Export UAV settings...

Title: Re: Revo will not arm
Post by: Curtgroff on April 30, 2016, 09:45:51 pm

Ok when I get back home I will thanks so much for your help

Title: Re: Revo will not arm
Post by: Curtgroff on April 30, 2016, 10:47:54 pm

Ok Here is the file I think I have everthing right

Title: Re: Revo will not arm
Post by: f5soh on April 30, 2016, 10:58:45 pm

Remove the "GPSAssist" you set for RTB and PosHold.

Setting a GPSAssist option for something that is already Assisted do not make sense and also trigger a config alarm.