LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: rvosatka on April 19, 2016, 03:25:12 pm

Title: Eight channels, but only six PWM pins?
Post by: rvosatka on April 19, 2016, 03:25:12 pm

Hi-

I see that it is possible to map 8 PWM channels.  The CC3D Revo only has 6 sets of output pins.  How do you connect 8 output channels?

-Thanks
Bob

Title: Re: Eight channels, but only six PWM pins?
Post by: f5soh on April 19, 2016, 03:38:32 pm

Hi, welcome.

First, there is CC3D boards and Revolution boards :)

You are limited to 6 PWM inputs but using PPM or others (SBUS, DSM...) you can use more channel inputs, with only one wire.