LibrePilot Forum
General Category => General Discussion => Topic started by: hugges on April 07, 2016, 09:49:56 am
-
Hi i have received a revo board from banggood and there is a problem with the baro
So the question how can i copy from the scope a picture of the baro output to my
pc so i can send it to banggood to show them the problem
-
If you're on Windows, look for the "Print Screen" or "PrtScr" (or something similar) key no your keyboard, press it and that might bring up a "Sniping tool" (I think) window, using that, you should be able to select an area of the screen to capture and save to a file.
If the sniping tool doesn't come up by itself look for it in the start menu under accessories (I think...).
Third option is you hit Print Screen then open up Paint and then hit Ctrl+V or paste. That should show the entire screen capture, vhish you can then trim to size and save to file.
I'm telling you this of the top of my head because I stopped using Windows, so some things might not be fully accurate, but it should be close enough.
-
How about mouse right click on the scope "Copy to Clipboard" and Ctrl+V to any graphical editor or MS Paint ?
-
Lol, didn't know about that one...