LibrePilot Forum

Development => GCS General => Topic started by: zukenj on March 23, 2016, 04:26:17 pm

Title: GCS HomeLocation in Setting (System Tab)
Post by: zukenj on March 23, 2016, 04:26:17 pm

Hello,

When I set the HomeLocation to false on the System Tab and click on the Hard Drive with the red arrow, I wait a little and it will change to True.

It working as intent?
How do I know that the setting was saved?

https://youtu.be/kEXo5eSLfH4 (https://youtu.be/kEXo5eSLfH4)

Armando

Title: Re: GCS HomeLocation in Setting (System Tab)
Post by: f5soh on March 23, 2016, 04:29:37 pm

When you set to false, the board refresh Home location coordinates from GPS data.

If you keep the "false" saved, the Home is updated every time you set power.

Bottom page:
https://librepilot.atlassian.net/wiki/display/LPDOC/Setting+Home+location

Title: Re: GCS HomeLocation in Setting (System Tab)
Post by: zukenj on March 23, 2016, 06:02:52 pm

F5soh thanks for your quick reply.

That is what I did in in the videi, and you can see that will go back to True.

???

Title: Re: GCS HomeLocation in Setting (System Tab)
Post by: f5soh on March 23, 2016, 09:13:11 pm

After the Home is set, he show: Set to True