LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: gazza95 on March 09, 2016, 09:16:38 am

Title: CC3D Config Error displayed in Firmware Tab
Post by: gazza95 on March 09, 2016, 09:16:38 am

Hi

I'm trying to replace OpenPilot 15.02 on a CC3D with LibrePilot 15.09 and am getting CONFIG and ? showing on the Firmware tab. This indicates that a GPS mode has been selected and CC3D obviously has not GPS. The help info is suggesting I have selected a Flight Mode that requires GPS. Attached is current Flight Mode settings.

The receiver is a FrSky X4SB and connected via S-Bus.


Any help would be welcome before I reinstall OpenPilot........


Gary

Title: Re: CC3D Config Error displayed in Firmware Tab
Post by: gazza95 on March 09, 2016, 12:21:03 pm

Seems to be fixed after Update with Reset. Have reentered all previous parameters and seems to be working, just need to fly it to check.

Gary