LibrePilot Forum

General Category => General Discussion => Topic started by: Stuartambient on March 05, 2016, 11:46:52 pm

Title: How to get LibrePilot back onto CC3D
Post by: Stuartambient on March 05, 2016, 11:46:52 pm

Can someone please advise or point me to how I would be able to return to LibrePilot and orig bootloader after flashing board with Cleanflight?  Thanks!

Title: Re: How to get LibrePilot back onto CC3D
Post by: letzfly on March 08, 2016, 03:42:23 am

Open GCS and go to the firmware tab. First click on "Upgrade & Erase" and then plug in your CC3D. That's it.

Title: Re: How to get LibrePilot back onto CC3D
Post by: Stuartambient on March 08, 2016, 10:18:05 pm

Thank you! I think though this has changed now and would require a flash using ftdi / usbuart.   Cleanflight is installed differently now on the cc3d and requires a more involved method to restore GCS.  Most of the instructions on the web are outdated from before Cleanflight started producing hex files only. 

Title: Re: How to get LibrePilot back onto CC3D
Post by: f5soh on March 08, 2016, 10:42:35 pm

You can restore CC3D bootloader following this steps:
http://www.southquay3d.com/index.php?route=news/article&news_id=9

Title: Re: How to get LibrePilot back onto CC3D
Post by: Stuartambient on March 08, 2016, 10:44:58 pm

Perfect, thank you!