LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: wogfun on October 31, 2016, 04:53:23 am

Title: artificial horizon rotated by 90 degrees
Post by: wogfun on October 31, 2016, 04:53:23 am

So just to be clear, I'm not reading the horizon wrong, it appears to be off by 90 degrees, and this is a prebuilt arris 250 and the FC came installed this way.  The wiring does not easily allow a 90 degree rotation.  I did flash new firmware to the FC and set everything else up successfully.  Is there anyway to rotate the artificial setting horizon without re-wiring the body?  Could an incorrect firmware be the issue?

Title: Re: artificial horizon rotated by 90 degrees
Post by: hwh on October 31, 2016, 06:27:35 am

Virtual rotation is in the attitude tab https://librepilot.atlassian.net/wiki/display/LPDOC/CC+Attitude+Configuration

A video of how it should look/work is at https://librepilot.atlassian.net/wiki/display/LPDOC/PFD#PFD-MyPFDlooksreversed

Title: Re: artificial horizon rotated by 90 degrees
Post by: wogfun on October 31, 2016, 01:48:23 pm

I entered 90 into my yaw and all is good now.  Thanks!