« previous next »
Pages: [1]
*

JanithMS

  • *
  • 31
CC3D rotating to on side in GCS
« on: November 16, 2016, 07:39:52 am »
Today I face another problem.Even my CC3D is 100% stable on the table, the compass in GCS's firmware tab is rotating to one side.When i check the Flight Data tab , the model is rotating/yawing to one side very slowly.I did Upgrade & Erase several times but the results was same.Is it good to fly with this issue? Can someone help me to get through :'(
« Last Edit: November 16, 2016, 09:13:08 am by JanithMS »
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: CC3D rotating to on side in GCS
« Reply #1 on: November 16, 2016, 12:43:13 pm »
This behaviour is normal.
Without magnetometer the Yaw axis only use gyro for heading and gyro has drift.
Roll and Pitch axis uses gyro and Accelerometer measuring gravity.
Logged
*

JanithMS

  • *
  • 31
Re: CC3D rotating to on side in GCS
« Reply #2 on: November 16, 2016, 01:27:36 pm »
Thanks f5soh :)
Logged
Pages: [1]
« previous next »