LibrePilot Forum

Users => Vehicles - Fixed Wing => Topic started by: Sushmit on December 08, 2017, 12:18:13 pm

Title: Need help with CC3D
Post by: Sushmit on December 08, 2017, 12:18:13 pm

Hi there  :)
Today I installed my cc3d on my plane everything works fine but my rudder and elevator are opposite to what it should be.
When I tilt my plane forward then my elevator goes down and vice versa.

Same for rudder.
But airleons are in right directions.

Need help.

Here is the video https://youtu.be/KfefznVJdSg

Title: Re: Need help with CC3D
Post by: f5soh on December 08, 2017, 09:18:55 pm

Hi, welcome.

You will need to reverse outputs for rudder and elevator in Config > Output tab

Seems you have a big moving part for elevator :)
Moving part is usually around 25%/30% of chord.