LibrePilot Forum
General Category => General Discussion => Topic started by: andre.g on February 04, 2017, 08:57:32 pm
-
Hi everyone,
I have opto esc so I have to give current to flight controller throw external bec.Can I connect it to the black and red cables from flexy port ?(the orange and blue cable are used for external mag)
Thank you
-
Yes, you can power the board using flexiIO, FlexiPort, MainPort or the normal way using output and servo connector.
All the Gnd and +5V are connected together on board.
-
Thank you
Inviato dal mio ALE-L21 utilizzando Tapatalk