LibrePilot Forum
Users => Vehicles - Fixed Wing => Topic started by: Sushmit on December 08, 2017, 12:18:13 pm
-
Hi there :)
Today I installed my cc3d on my plane everything works fine but my rudder and elevator are opposite to what it should be.
When I tilt my plane forward then my elevator goes down and vice versa.
Same for rudder.
But airleons are in right directions.
Need help.
Here is the video https://youtu.be/KfefznVJdSg
-
Hi, welcome.
You will need to reverse outputs for rudder and elevator in Config > Output tab
Seems you have a big moving part for elevator :)
Moving part is usually around 25%/30% of chord.