[krebbi]

I have a cc3d with next r735 installed on my traxxas and want to store "always armed" for obvious reasons. But the setting is erased after powering off the board.
Bug or feature? And is there a workaround?

thx

[f5soh]

Settings cannot be stored while the board is already armed > Red cross displayed just after clicking the save button.

You will be able to save this setting with the battery disconnected : Input alarm in SystemHealth is Orange (no signal from receiver) and board do not arm.

[krebbi]

no red cross after saving. green check instead.

i'll give it a try with battery disconnected.