LibrePilot Forum

Development => GCS General => Topic started by: myflyer on June 04, 2016, 01:02:03 am

Title: Changing basic set up of quad
Post by: myflyer on June 04, 2016, 01:02:03 am

Hello, when I first set up my robocat with the  wizard I picked a guad from the list and now want to change it to a different basic set up. Do I have to run the  entire wizard again or can I skip to the page and pick the right set up for the robocat. Also will I have to run the  transmitter setup again

Title: Re: Changing basic set up of quad
Post by: m_thread on June 04, 2016, 09:08:59 am

Hi


You don't have to rerun the wizard to select a new template. You can open the template functionality directly from the Tools menu. See attached image.


Cheers
/Fredrik

Title: Re: Changing basic set up of quad
Post by: myflyer on June 04, 2016, 11:09:54 pm

Thank you IAM going to try the eMax 250 for my robocat. If you have any other  suggestion that would be  appreciated

Title: Re: Changing basic set up of quad
Post by: myflyer on June 05, 2016, 04:34:06 pm

Just wanted to thank you again it was so easy too change my basic set up. I even took my laptop and did it on the fly Intill I found the right one.