LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: SicSkillz90 on March 27, 2016, 05:29:20 am

Title: QAV210 PIDS
Post by: SicSkillz90 on March 27, 2016, 05:29:20 am

Hi everyone  8),

I am looking for some PIDS to start tweaking. I am using the stock PIDS for a generic X copter but I get harsh left/right rolls. Right now I am flying a QAV210 and listed the specs below. Thanks for any help.

QAV210
Emax 1806 2280KV
12 Amp Opto ESCs
CC3D Atom (LibrePilot)
3S 1300mAh

Title: Re: QAV210 PIDS
Post by: NicholasDavid on March 27, 2016, 08:13:07 am

I would try some different defaults. Either one of the qav 250(any one). The blackout defaults work well also. That is what I would start with. Either of thoes will be better than the generic X. I started my alien 5" on blackout defaults. And they aren't even close in design or components. But it's still was very flyable and was a good starting point.