LibrePilot Forum
Users => Vehicles - MultiRotors => Topic started by: anthropo on October 25, 2017, 09:31:04 pm
-
Hello,
just tried Next with my revolution Board, but no luck. I don't have telemetry. Fly mode is present, but nothing else. I revert back to 16.09 and it works. I thought it was connectors but it isn't.
Thank you
-
Forgot .uav
Also led strip doesn't work anymore
-
What do you mean with "no telemetry" ?
Using USB, flexi/Mainport or oplink ?
ws28xx led will be fixed/merged soon : https://bitbucket.org/librepilot/librepilot/pull-requests/473
-
OpLink telemetry needs the GCS OpLink updated to 'next' as well. After that you will have to "rebind" them too. Maybe that is your issue.
Also be aware that there is a bug with export and import UAV files in 16.09 (at least with Revo class FC). When you export via OpLink, the UAV file will hold settings for the aircraft except for the OpLink settings. OpLink settings part of UAV file will come from the GCS OpLink. When you Import via OpLink, the FC in the aircraft will get the settings from the UAV file, except for the OpLink settings. The OpLink settings from the UAV file will be put into the GCS OpLink.
The work around for now is to always do import and export with a USB cable in 16.09.
-
I have selected ppm+telemetry, as I have pin 7 and 8 of FlexiIO connected to my minopsd. I have gone back to 16.09 and restored my 16.09.uav, and it works.
Then installed Next again and only flight mode appears. In GCS for example I see satellites, and on video it shows 0. And messages like it has no data (i don't remember the exact message).
-
Telemetry+PPM using receiver port works fine here.
I assume when you talk about "only flight mode appears" is OSD related ?
Your OSD firmware is simply outdated, try file attached.
-
Sorry for the delay. But OSD was resolved by new firmware and Led strip by new commit.
Thank you
-
Great ;D