LibrePilot Forum

Development => Hardware => Topic started by: lucapif on July 12, 2016, 08:33:16 am

Title: Revo and entrance sumD
Post by: lucapif on July 12, 2016, 08:33:16 am

Hi, you can have the FlexiIO Revo in SumD and out pwm?
thank you
Luca

Title: Re: Revo and entrance sumD
Post by: f5soh on July 12, 2016, 12:15:30 pm

FlexiIO refers to the receiver port

You can set the flexiPort as Hott SumD and receiver port (FlexiIO) as outputs

(https://forum.librepilot.org/index.php?action=dlattach;topic=1981.0;attach=3625)

This applies to Next branch (Hott input) ^^^

https://librepilot.atlassian.net/wiki/display/LPDOC/Revolution+Configuration#RevolutionConfiguration-FlexiIOpinOut/Functions

Title: Re: Revo and entrance sumD
Post by: lucapif on July 12, 2016, 01:58:34 pm

Thank you f5soh.

Main port= GPS
Flexi port = OSD
How can I do?

8CH-Receiver-PWM-to-PPM Encoder-Signal-Converter=FlexiIO(ppm in+ PWM out)?

Title: Re: Revo and entrance sumD
Post by: f5soh on July 12, 2016, 02:26:20 pm

I don't understand what you want: SumD refers to Hott (SumD) and now you talk about PPM ?

Please explain your full setup wanted.

Title: Re: Revo and entrance sumD
Post by: lucapif on July 12, 2016, 04:02:01 pm

Sorry but I do not know English.
I rx hott

Title: Re: Revo and entrance sumD
Post by: f5soh on July 12, 2016, 04:33:00 pm

Ok

Current next branch support SumD on FlexiPort but currently cannot help you because you need Outputs on flexiIO.

If you can convert to PPMsum, you can configure as follows:

(https://forum.librepilot.org/index.php?action=dlattach;topic=1981.0;attach=3629)

FlexiPort for OSD
MainPort for GPS
FlexiIO for PPM and Outputs